Tuesday, September 28, 2010

Pacific War Photos

Here's a great set of Pacific war photos on another blog, for those who are interested check this link!

Click here for the photos

Saturday, July 10, 2010

Panther G finished!

IMG_0029

Finally wrapped this project up! For the full photos check out the gallery on missing-lynx.

Wednesday, March 10, 2010

Making Bases

These bases can be used for displaying models or your top piece of militaria.

Some advantages of making your own bases are that they are cheaper than those commercially available, and they can be made from all sorts of exotic woods.

To make bases you will require the following:

-Various sizes of wood blocks to cover with veneer.  I try to make all the bases at least 1 1/2 - 2 inches thick.
-An assortment of different veneers.  My favorites are birds eye maple, walnut burl, maple burl, any sort of nice burl...
-Stainable Wood glue.
-A sharp knife, such as a model scalpel with #11 blade.
-Sanding blocks.
-Clamps.
-A large flat surface like table that you can clamp onto.
-Wood finishing products, such as stain and lacquer clear coat.

Step 1: I decided to make the base for my Panther from Walnut Burl:
IMG_9423
Step 2: Apply the veneer to the wood block, start by doing the edges, cover the area where you are applying veneer with a thin coat of stainable wood glue.
IMG_9424
Step 3: Once the base is covered with veneer, sand, making sure to take the arris off the edges and remove and excess glue. I used a 200 grit sandpaper and worked well, but you could go finer. Make sure not to sand threw the veneer! (note: I did not use the sanding stick in the photo for this, except for removing the arris)
IMG_9425
IMG_9426
Step 4: Stain and varnish. For this base, I liked the natural colors of the wood and decided to just apply 4 coats of fast drying polyurethane from a spray can. I think the natural colors in this case look excellent.
IMG_9427
Step 5: I had a friend at the local framing shop do a black frame around the bottom for the final touch. A frame like this is usually very cheap and takes them about 5 minutes to make on the spot.
IMG_9429
Step 6: Apply model ;-) I will also have a name plaque done at some point when the figures are painted.
IMG_9430

The end result is worth it. Any model you have spent large amounts of time researching, detailing, and painting deserves a nice base to be displayed on.

Tuesday, March 9, 2010

Panther Weathering Part 2

This week I just managed to get more painting done, next will be painting the figures.

IMG_9418
IMG_9415
IMG_9420
IMG_9417

Wednesday, March 3, 2010

Panther Weathering

Although still many hours to go, the weathering on my Panther is progressing slowly, still needs paint chiping, more dirt, details, oil stains, ect. ect.

IMG_9387

IMG_9388

More soon hopefully.

Saturday, February 20, 2010

Spitfire Engine

The final hurdle! I have assembled all details possible at this point on my spitfire prior to getting out the airbrush.

I did not want to distract from the outline of the spitfire and have an entirely exposed engine so decided on just having this one side panel off the plane. I didn't do much on the engine except some fine details and wiring.

IMG_9385

Some modelers who leave the top panel off may want to add the "ROLLS ROYCE" cast into the rocker covers, some small ABER photo-etch letters would probably work fine.

Spitfire Wing Blisters

The wing blisters in Tamiya's Spitfire is a detail that has caused a lot of debate over the new kit. Included with the kit is a uncommon although in some rare cases accurate squared off set of blisters. The version most common is as portrayed in this photo:

CopiedeSpitVC03

Already, some resin manufacturers have provided new blisters, however, these new blisters I do not feel accurately portray the photo, and also require removing the kit blister entirely from the gun cover, and glueing down the new ones - I don't know why anyone hasn't just made strait replacement pieces yet? I decided to stick to my goal of doing all the details from scratch for my build and set out to copy the photo I had, below is my end result and I feel it is accurate enough for me:

IMG_9381

Just a couple wires left on the engine and I will need to build a pilot for my Spit and actually start painting this thing.

Friday, February 19, 2010

Panther Airbrushing

I've been slowly painting my Panther. At this point the airbrush work aside from clear coats is complete, and after a gloss coat I will begin the washes. I have been using Humbrol paints for the camouflage colors, and some Tamiya lacquers for the dust and dirt.

IMG_9369

I used the color plates and pictures from Duel in the Mist by AFV Modeller publications as my main reference for painting the dot pattern. The markings are from Archer dry transfers, pieced together from one of their Panther mix sets.

Thursday, February 18, 2010

1/32 Spitfire Details

I've been working away for the last couple weeks at Tamiya's excellent 1/32 Spitfire. The kit is great strait out of the box, however I decided to make a few minor corrections and add some of the finer details that are not present in the kit.

For the seat I added the padded back-rest, missing rivets, and made corrections to the harness using fine wire (.006" & .012")
IMG_9334

The sidewalls of the cockpit have been riveted using a fine pounce wheel, I feel it is better to at least represent some sort of riveting than nothing at all in this case. For the more prominent rivets I used sliced .010" plastruct rod, a very time consuming and frustrating process.
IMG_9338
IMG_9339

The throttle and main landing gear mechanisms have been detailed by removing the thick molded controls and replacing them with thin plastic scratch-built ones, and I used a fine saw to add the recessed paths that they sit in.
IMG_9327
IMG_9321

The control spade has missing tape added, a detail that is in every spitfire but Tamiya decided not to portray in the kit, possibly because it would not look right molded in plastic. I wrapped thinly sliced decal around the control spade and sealed it with a coat of Tamiya grey putty mixed with Tamiya extra thin cement. More sliced .010" rod rivets are visible in this picture as well.
IMG_9335
IMG_9323

The cockpit side walls detailed.
IMG_9354
IMG_9348

The pilots access door has been detailed and I have scratch-built an oxygen hose, another detail missing in the kit if you choose not to model the plane with the pilot in the cockpit. The hose was made by using aluminum rod bent to shape, wrapped with fine wire, the brass piece on the end was made on my small home-made lathe, and the clasp is an old piece of photo-etch.
IMG_9333

Some of the kit decals inaccurately portrayed such as the blue artificial horizon have been replaced with more period instruments from a Mike Grant decal set I was given.
IMG_9363

I have added new brake lines and a few missing rivets to the landing gear.
IMG_9358
IMG_9360

A few more details need to be added to the engine, and I want to do some sort of pilot figure to go with the plane, and then it will be time to paint!

Anatomy Correction

It was pointed out to me by several modeling friends that I made an error in the anatomy of the commander of my Panther. I went back to the figure after taking several pictures of myself in the same pose and corrected the shoulder and position of the arm.

IMG_9097
IMG_9098
IMG_9033

A few cuts and some magic sculpt was all it took to make the correction and I must admit the figure looks much more realistic.